Power Supply: Dual Digital LCD, (Black), with Foot Pedal Switch

Power Supply: Dual Digital LCD, (Black), with Foot Pedal Switch

  • $ 69.99


PS-II INTRODUCTION
Operating current: 1.0—3A,(Max: 2.5A)
Input voltage:100V-240
Output voltage:0--18V
Voltage load protection:99%
Current load protection:99%
Power output:54W
Output accuracy:±5%
Operating Humidity:5%-95%
Operating temperature:-10℃ - +40℃
Area of application:100-240V (Any country)
“PS-II” is a multi-functional precision detection power supply. It can be switched between Coil mode and Motor mode. It micro-controls the voltage level by using buttons. The front page “Power Unit PS-II” will pop up after it is plugged into a general microphone jack. After 3 seconds, the screen will jump to main page showing the working voltage of the previous time. “PS - II” will be turned off automatically after 5 seconds without working.
Functions:
* Voltage test, Current test, Duty cycle test, and Speed frequency test
* Can be switched between Coil and Rotary tattoo machine mode
* Automatically saves 4 working voltages and keeps the last one as the storage standard
* Power supply has self protective device. If used improperly, it will automatically cut off the power with the display light on
* Current overload protection function for Coil Mode. When current loads up to 99%, after 1 min it will cut off the power by itself with the display light on. Please DO NOT use Rotary Machine under Coil Mode. You will have to get back to main menu to switch it to Rotary Mode
* Power supply can control the foot switch momentary or to continue
Upper Key Functions: 
* Make screen brighter by long-press when it is at main menu
* Increase voltage by 0.1 when it is at operation status
Middle Key:
* Switch between operating page and main menu
Left Key:
* Choose mode between Coil and Rotary machine
* Show operating log for the past 4 operating voltages M1, M2, M3, M4
Right Key:
* Pedal switch and lock
Down Key:
* Make screen darker by long-press when it is at main menu
* Decrease voltage by 0.1 when it is at operation status
 
 
Iron Tattoo Foot Pedal Switch for Power Supply Blue
N.W.: 16g
Color: Yellow
Material: galvanized iron
Wire Length: 1.8m
Features:
Foot external high-quality soft silicone line, can easily drag and drop on the floor, not broken, built 65 stocks of crude copper, overcurrent large current stability, tinned copper universal microphone plug is not easy to short-circuit, fine workmanship, good conductivity, touch sensitive, light step can be conductive, non-electronic switch design, electronic components without worrying about corruption issues, durable, lifetime warranty!